Ramsey Electronics AVS10 Manual de Instruções

AVS10 – 1 Ramsey Electronics Model No. AVS10 Don’t miss a beat; watch 4 cameras on one monitor! Perfect for multiple video camera installation

AVS10 – 10  3. Install U1, the MC68HRC908JK1 programmed chip [20 pin chip with paper label] into the IC socket. Check the orientation before in

AVS10 – 11  18. Install C5, 10µF electrolytic capacitor. Electrolytic capacitors also have a polarity and must be installed properly. You will n

AVS10 – 12 INITIAL TESTING If any of the following steps fail to produce the desired result, turn to the trou-bleshooting section of the manual (be

AVS10 – 13 • Correct installation of all jumpers. • Check the polarity on your power supply. The AVS10 requires a posi-tive tip supply! If you stil

AVS10 – 14

AVS10 – 15 The Ramsey Kit Warranty Please read carefully BEFORE calling or writing in about your kit. Most problems can be solved without contactin

AVS10 – 16 AVS10 AUTOMATIC VIDEO SWITCHER Quick Reference Page Guide

AVS10 – 2 RAMSEY TRANSMITTER KITS • FM100B Professional FM Stereo Transmitter • FM25B Synthesized Stereo Transmitter • A

AVS10 – 3 AUTOMATIC SEQUENTIAL VIDEO SWITCHER Ramsey Publication No. MAVS10 Manual Price Only $5.00 TABLE OF CONTENTS Introduction ...

AVS10 – 4 INTRODUCTION In today’s world there are many situations that require monitoring, but no one can be in four places at once. Now, with the

AVS10 – 5 MicroInitializationCheckSwitch1Turn ON Video 1 Conrol Line1 to 5 SecondDelayTurn OFF Video 1 Conrol LineVideoEnabledSTOP/SCAN Not PressedV

AVS10 – 6 PARTS LIST RESISTORS  1 1K ohm resistor [brown-black-red] (R1)  1 5.6K ohm resistor [green-blue-red] (R3)  4 10K ohm resistor [b

AVS10 – 7 AVS10 PARTS LAYOUT DIAGRAM

AVS10 – 8

AVS10 – 9 ASSEMBLY INSTRUCTIONS In ALL PC board assembly steps, our word "INSTALL" means to do this:  Insert the part, oriented or &qu