Ramsey Electronics SG560 Guia do Utilizador Página 1

1 USER GUIDE JANUARY, 2005 Rev. 1.3 SG560 SIGNAL GENERATOR Copyright Ramsey Electronics, Inc. 2005, All rights reserved Property of Ramsey

10 BASIC USE Saving and Recalling Memories: To save a memory, set up the SG560 into the desired frequency, level, offset and wave shape. Press SHIFT,

11 DETAILED INFORMATION Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

12 DETAILED INFORMATION +1.0V -1.0V +0.0V +1.3V -0.7V +0.3V +5.0V 0.0V +2.5V +2.5V -2.5V +0.0V Example of 2V peak to peak with 0V offset and 0.3V offs

13 DETAILED INFORMATION Using the SG560 Differential Outputs Since the SG560 has a differential output, the (+) jack is 180 degrees out of phase with

14 DETAILED INFORMATION Setting Meter Output Impedance The default output impedance of the SG560 is 50 ohms, but it is possible to change this set-tin

15 DETAILED INFORMATION Signal Descriptions: TP1 is the SG560 direct output; note the flat line vs. frequency. TP2 is the correct filter output as

16 DETAILED INFORMATION Dealing with Small Signal Levels and Noise: If small signal levels are needed for a test setup and the output noise of the S

17 DETAILED INFORMATION Your Notes: Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

18 DETAILED INFORMATION Your Notes: Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

19 APPENDIX Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

2 TABLE OF CONTENTS Introduction • Opening the Box...

20 APPENDIX 67.0 79.7 156.7 179.9 210.7 241.8 71.9 82.5 162.2 186.2 218.1 250.3 74.4 85.4 167.9 192.8 225.7 77.0 88.5 173.8 203.5 233.6 Standa

21 APPENDIX Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

22 SPECIFICATIONS Features: •Display: 2x16 Character Display •Memories: 6 Nonvolatile Locations •Displays: Frequency, Waveshape, Peak to Peak Voltage,

23 Certification Ramsey Electronics, Inc. certifies that this product meets its published specifications at the time of manufacture, and that the ca

24 RAMSEY ELECTRONICS, INC. 590 Fishers Station Drive Victor, NY 14564 (585) 924-4560 www.ramseytest.com Copyright Ramsey Electronics, Inc. 2005, Al

3 INTRODUCTION Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

4 INTRODUCTION Opening the Box Your new SG560 includes: 1 SG560 Signal Generator 1 Operator’s manual 1 120/240 VAC Input, 12VDC/500mA Output Exter

5 INTRODUCTION Introduction The SG560 is more than an audio generator. It is also a signal generator that produces AC signals with DC coupling at th

6 INTRODUCTION SG560 AUDIO GENERATORDATAFREQLEVELOFFSETSHAPE1234.SHIFTMHzVkHzmVHzRCLSTO0-5MHZTRUE-DC( )-( )+a580be7d69cfmuteSHIFTPOWERFront Panel Ov

7 BASIC USE Property of Ramsey Electronics, Inc. Do not reproduce or distribute.

8 BASIC USE Basic Use Generating a Frequency: To enter frequency, press the FREQ key to get into the desired field. A blinking cursor will indi-cate

9 BASIC USE Setting Generator Offset: To enter a DC offset, press the OFFSET key, then any voltage in the range of 0-5V with 10mV of resolution. The